Meprolight MPO PRO-S Enclosed Emitter Red Dot Sight for HK CC9 and VP9CC
The Meprolight MPO PRO-S is a compact, enclosed red dot sight built for everyday carry and range use. Its selectable dot, ring, and combined reticle options let you choose your preferred sight picture, while the enclosed emitter stays protected from dust, debris, and moisture.
Includes:
- Meprolight MPO PRO-S sight
- RMSc adapter plate
- Two 6-32×6 Nylock patch screws
- Two M4x6 Nylock patch screws
- Combination screwdriver and T10 Torx tool
- CR1632 battery
- Cleaning cloth
- User manual
Features:
- Three selectable reticle configurations
- Automatic and manual brightness control
- Shake Awake and power-saving sleep mode
- Fog-resistant construction
Specifications:
- Mounting footprint: RMSc/JPoint through the included adapter plate
- Emitter: Enclosed
- Reticle color: Red
- Reticle options: 3 MOA dot, 33 MOA ring, or combined 3/33 MOA bullseye
- Brightness settings: 10 daylight and 2 night vision
- Battery: One CR1632
- Battery life: 20,000+ hours at setting 5 using the 3 MOA dot
- Lens dimensions: 0.78″ wide x 0.60″ high
- Windage and elevation adjustment: 1 MOA increments
- Windage and elevation travel: ±30 MOA each
- Water and dust resistance: IP67
- Color: Black
- Manufacturer part number: 901141172
Compatible With:
All listed configurations use the optic’s included RMSc adapter plate.
Models compatible using factory mounting provisions:
- CC9 – factory RMSc-compatible optic cut
- VP9CC – factory-supplied RMSc optic plate
Models requiring an RMSc optic plate:
- VP9 OR, VP9 Tactical OR, VP9L OR, VP9 Match OR, VP9SK OR, VP9A1 K and VP9A1 F with optics-ready slides – H&K RMSc optic plate, HKP-22381
Models requiring a rear-sight optic mount:
- VP9, VP9SK, VP40, VP9A1 K and VP9A1 F with non-optics-ready slides – EGW optic mount, HKP-20045
Models requiring a receiver mount and RMSc optic plate:
- MP5, SP5, MP5K, SP5K, SP89 – HKP universal optic mount, HKP-20967-BL, with H&K RMSc optic plate, HKP-22381
- MP5 .22 LR – HKP universal .22 LR optic mount, HKP-20968-BL, with H&K RMSc optic plate, HKP-22381
Please note: Compatibility requires the mounting configuration listed above. The VP9CC uses its factory-supplied RMSc plate. Other listed firearm-specific mounts and plates are sold separately. Mounting hardware must match the selected configuration. The listed USP mount does not fit USP Compact, USP Expert, or USP Elite models.
